Railblaza & YakGear

Finally, a fish measurement board specialized for anglers in tight spaces. With limited space in the cockpit of a kayak, on the deck of a paddleboard, or in a gear bag when wade or bank fishing, The Fish Stik gives you back your fishing space by folding down and storing easily.  The new design addresses the biggest problems with old-school measuring boards, poles, and tapes: it folds down to save space and it floats. Stop compromising your space and your measurements. Get back to fishing;...

Using the YakGear Rod Floats, your rod will stay on top of the water instead of sinking to the bottom if it falls out of your hands or your boat, saving you money and getting you right back to casting. Whether fishing with children or for peace of mind, this is a must-have product. Installs in seconds, just slip onto your fishing pole, attach the Velcro straps, and you’re done! Comes with 3 colors: Yellow, Orange, and Blue. Each float is roughly 8 inches long.  ...

The little brother to the Rod Holder II, it is designed to hold fishing rods with spinning, bait caster, or fly reels.The Rod Holder R is a light-duty rod holder suitable for fresh water and inshore fishing, not trolling for large fish. It will fit into any RAILBLAZA mounting port. The stretchable strap at the front of the holder will wrap around the top for bait caster and fly reels and round the bottom for spinning reels, keeping your rod and reel safe. Molded in rugged fiberglass...

Anchor your kayak, canoe, or small boat worry free with the YakGear 3.3-lb (1.5kg) Grapnel Anchor Kit. This 3.3-lb (1.5 kg) galvanized steel anchor features four 6-inch tines that fold out of the way while stored for space maximization and release when ready for use. The heavy head design of the anchor creates less wait time until the anchor is fully submerged into the anchoring surface on deeper and faster moving water. 30 feet of 3/16 inch black nylon anchor rope and a storage ditty bag....

Whether you want to replace your worn out handles or install a couple of extras carrying points, the YakGear Handle Kit provides the answer. Constructed from marine-grade rubber with double-thick nylon straps for durability, this set of handles also features a contour grip for comfortable use and practicality during transportation. As always, this complete kit comes with all stainless steel installation hardware, installation instructions, and rigging tips from YakGear. Waterproof silicone...

Catch the big fish while anchored with the little anchor kit with the complete Yak Gear 1.5lb (.7kg) Grapnel Anchor Kit. This 1.5lb (.7 kg) galvanized steel anchor features four 6-inch tines that fold out of the way while stored for space maximization and release when ready for use. While it may seem too small, the use of a 1.5lb anchor is a more than adequate weight for kayaks and canoes in rivers, lakes, and slower moving water. “Rock Rig” and “Add a Rope” capabilities are included in the...

Add or replace the drain plugs on any kayak with the Yak Gear Universal Drain Plug Kit. This kit provides the two most commonly used kayak and paddle boat drain plugs with a wide thread (red washer) and fine thread (black washer)to accommodate most paddlers. Both drain plugs come with top flange. As always, this complete kit comes with all stainless steel installation hardware, installation instructions, and rigging tips from Yak Gear. Water proof silicone recommended, but not included. ...

Add or replace paddle holders with the Yak Gear Taco Paddle Clip Kit. While there are many different ways to mount and store paddles on kayaks and canoes, the 6 inch long taco paddle clips provide the same storage benefits with an easier installation process. The universal design fits most paddles, ranging in circumference from 1-1/4 inch to 1-1/2 inch with a 1-1/8 inch opening on top for a continued locking effect while in use. As always, this complete kit comes with all stainless steel...

The RAILBLAZA StarPort is the unique and versatile multifunctional mount, which allows users to fit and re-task the full range of RAILBLAZA accessories. The StarPort can be used as either a deck mount or flush mount base. This base not only comes with a gasket and cap, but also features a slide locking mechanism to confidently lock the RAILBLAZA accessory in place. Made from high grade engineering plastics, the StarPort is easily installed on kayaks, canoes, power boats, sail boats, and ATVs....

Solve the problem of unknown sizes of lost scupper plugs with the Yak Gear Universal Scupper Plug Kit. Scupper plugs act as sealant to the self-bailing scupper holes to keep extra water out of the cockpit of your sit-on-top kayak. These plugs fit any scupper hole with a circumference ranging from ¾ inch to 1-1/2 inch.

Rigging your craft with RAILBLAZA accessories just got a whole lot quicker and more versatile with the MiniPort TracMount. No tools required, The MiniPort TracMount is designed to fit most existing tracs, including YakAttack, Wilderness Systems, Native Watercraft.Completely tool less operation which is easily fitted and adjusted simply by turning the MiniPort which tightens directly in the trac using our TracNut. Re-positioning in the track is as simple as turning to release the tension.PLEASE...

The RAILBLAZA's "Mobi" is ready to look after your phone, GPS, VHF, EPIRB or other mobile device. Our unique design brings a new level of versatility to the device holder market, once you have your Mobi you can attach it to any vessel or vehicle on water or land - basically any place you can install a RAILBLAZA StarPort, RIBPort or RailMount. The spring loaded arms are sufficient for most applications, with neoprene rubber pads to give high gripping power. For extra peace of mind the...

he RAILBLAZA Rod Holder II will hold any type of rod and reel, with quick adjustments. The rotating collar helps reduce ‘strike-theft’ and the rear gimble lock reduces rod rotation for compatible rods. This rod holder is fully adjustable 360 degrees around and over 90 degrees vertically. Like all RAILBLAZA accessories, this the Rod Holder II fits all RAILBLAZA bases. No hardware or tools required for accessory installation because the RAILBLAZA Mini-Port Base is included

Accommodate or place any accessory into any track system with the Yak Gear Universal Track Nut and Allen Screw Kit. This universal kit fits Wilderness, Native, Yak Gear and YakAttack tracks. Yak Gear track nuts and allen screws are all 304 stainless steel. Stainless steel does not readily corrode, rust or stain with water as ordinary steel does, but despite the name it is not fully stain-proof, most notably under low oxygen, high salinity, or poor circulation environments. Track nuts and allen...